|
|
Bob
Smith Glue
|
Cart contents
You have 0 item(s) in your shopping cart
for a total of $0.00.
|
|
|
|
|
INSTA-CURE™
comes in three viscosities, thin, medium
and thick. Thin wicks deep into joints
by capillary action and cures in a matter of a few seconds. Surfaces
to be bonded must be tight fitting and should be held together while
you apply the CA around the edges of the seam. At the moment CAs
cure, they give off a vapor that can irritate the nose and eyes,
so be prepared. Thin CAs work very well on balsa since they penetrate
into the wood and form more than just a surface bond.
|
|
|
|
IC-2000™
is a rubber-toughened cyanoacrylate that forms superior shock resistant
bonds on non-porous surfaces. The black colored CA has added flexibility
for the bonding of metals, fiberglass, rubber, carbon-fiber and other
advanced materials. For model use, IC-2000™ is ideal for the
bonding of bulkheads, formers and servo rails to the inside of fiberglass
hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated
with INSTA-SET™. When cured, IC-2000™ is pliable enough
to be carved with a hobby knife. IC-2000™ is the best adhesive
for R/C car tires
|
|
|
