|
|
E-flite
Airplane ARF Kits
|
Cart contents
You have 0 item(s) in your shopping cart
for a total of $0.00.
|
|
|
|





|
Eflite F-15 Eagle
E-flite has replicated the F-15 Eagle as a sport, scale model. This military fighter model boasts the scale Edwards Air Force Base Safety Chase trim scheme making it a very attractive and highly visible plane. Spend less time building and more time flying, this model comes out of the box fully painted red and silver on white foam with custom decals applied. It even includes retracts.
This high powered model was designed around the use of two 420 DF 3800 Kv motors to match with the included ducted fan units. The low wing loading and twin ducted fans allow superior maneuverability and acceleration to perform basic aerobatics. While this plane is capable of flying a tight flight pattern, it can still be flown at your local park. The wings are each reinforced with a carbon fiber tube spar for added stability. This model also has full flying horizontal stabilizers for pitch control and stability.
The flight characteristics and response of E-flite’s F-15 Eagle mirror those of the full size McDonell Douglas Eagle, down to the aerobatic capabilities. This model was created for the ambitious sport scale, advanced pilot looking for a versatile model capable of park flying.
Includes:
*Ducted Fans included
*Retracts included
*Carbon Fiber Wing Spar
*Injected Molded EPS foam- lightweight and easy to repair
| E-Flite F-15 |
Specifications |
| Wing Span |
36" |
| Speed Control (Requires 2 brushless) |
40 amp |
| Servos (5 or 8 Required) |
HS-55 |
| Weight |
40-50 oz |
| Fuselage Length |
47 " |
| Motor (requires 2) |
420 Ducted Fan BL 380kv |
Eflite Outrunner 420 motor #EFLM1340DF
|
|
|

|
F-16 Falcon DF ARF
This E-flite’s F-16 400 DF is designed to replicate the full-scale F-16 as a performance sport scale model. Constructed of lightweight, durable injection-molded foam, the F-16 is beautifully finished with a highly visible USAF Thunderbird trim scheme. The F-16 400 DF also includes molded panel lines and custom applied decals for added scale appearance. The F-16 is highly prefabricated with molded servo pockets, prehinged flight surfaces, a magnetic battery hatch and the included and installed motor and fan unit to get you in the air faster.
The F-16 is capable of smooth, aerobatic maneuvers sure to please any crowd and will offer the ambitious sport scale modeler just the thrill he’s been looking for.
* Authentic prefinished USAF Thunderbirds trim replicates look of the popular air show performer
* Ducted fan unit with motor included and installed
* Injection-molded detailed foam airframe
* Prehinged flight control surfaces
* Molded servo pockets
* Optional detailed missiles and missile racks
* Easy access canopy with magnetic hatch
* Officially Licensed by: Lockheed Martinwing
| Eflite F-16 Falcon |
Specifications |
| Wing Span |
28" |
| Wing Area |
195 sq in |
| Weight |
23.5-25.5 oz w/battery |
| Fuselage Length |
33.5 " |
| Recommended Engine |
400 DF included |
| # Servos Required |
4-5 |
|
|
|

|
J3 Cub ARF
This is the only 25-size Cub with scale ailerons. Quality balsa and light ply construction make for a sturdy, lightweight airframe that handles incredibly well in most any flying situation. The firewall is set up for use with an outrunner motor, such as E-flite's Power 25, making a perfect power match for the airframe. Optional floats add a new dimension to the scale flying experience, and the one-piece wing allows for easy transportation to and from virtually any flying field, pond or lake.
* Outstanding scale detail, including the factory-painted fiberglass cowl
* Scale aileron design sets the E-flite J-3 Cub apart from other 25-size electric Cubs
* E-flite's optional 25-size floats are easy to assemble and attach to the J-3 Cub
* Built-in float mounts
* Removable one-piece wing for fast transition to the flying field
* Factory-painted landing gear with authentic Cub wheel caps
* Quality balsa and light-ply construction, and genuine Ultracoat covering
* Outrunner-ready firewall—perfect match for E-flite’s Power 25 Outrunner, 870 Kv
* Flies great with LiPo (THP42003S2PPL) or Ni-MH (EFLB4010) packs
| Eflite J3 Cub |
Specifications |
| Wing Span |
62" |
| Wing Area |
550 sq in |
| Weight |
4-4.25 lbs |
| Fuselage Length |
35.5 " |
| Recommended Engine |
Outrunner |
| # Servos Required |
4 |
Eflite J3 Cub Floats
* Pre-bent and assembled wire struts
* Premium fiberglass construction for extreme durability
* Wire struts pre-bent and welded for J-3 Cub
* Pre-painted with fuel proof paint
* Quick connecting water rudder assembly
* Pre-built ventral fin for J-3 Cub covered in Cub Yellow Ultracote
* Designed for scale and sport models up to 6 pounds
|
|
|

|
Eflite Cap 232 BP
The CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer. It's all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wood airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote® and UltraCote Lite so you can be up and flying in no time. stic paint scheme and markings
- ingenious open-structure balsa/light-ply design minimizes weight and maximizes strength
- Light wing loading and large control surfaces for astonishing freestyle and 3D capability
- 90% pre-built and covered in UltraCote
- Carbon fiber pushrods
- All hardware is included
- Out-of-the-box compatibility with E-flite outrunner or inrunner brushless motors
- Outrunner Stick Mount included
| Eflite Cap 232 |
Specifications |
| Wing Span |
35.5" |
| Weight |
15.5-17oz |
| Fuselage Length |
35.5" |
| Motor |
450 with gearbox |
| Number of Servos |
4 |
|
|
|

|
Mini Funtana X
The Mini FuntanaX is another in E-flite’s outstanding line of electric RC aircraft and accessories. E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby, so your electric flight experience is always a positive one.
To create the new Mini FuntanaX™ ARF, E-flite® began with the proven 3D benefits of the original Mini Funtana design. From there, they increased the wing area, added wing fillets and optional Side Force Generators, resulting in an airplane that excels in high-alpha and all-around maneuverability. Outfitted
with an E-flite Park 480 brushless outrunner, the Mini FuntanaX is capable of superb vertical performance.
| Mini-Funtana |
Specifications |
| Wing Span |
43" |
| Wing Area |
447 sq in |
| Weight |
27-29oz |
| Fuselage Length |
40.5 " |
| Recommended Engine |
park 480 |
| # Servos Required |
4 |
|
|
|

|
Mini Ultra Stick ARF
Based on the popular Hangar 9 Ultra Stick, the E-Flite Mini Ultra Stick comes 95% pre-built from balsa and light-ply and is covered in genuine UltraCote. This tiny model is extremely versatile and absolute Blast to Fly - Ideal for those making the transition from electric trainers. Basically for any RC pilot looking for a spirited sport plane that goes together fast. The construction of the Mini Ultra Stick is full of surprises, two firewall options that let you use a wide variety of motors, bolt-on tail and easy access battery hatch. This along with clearance for larger props, tall lightweight aluminum landing gear provides for the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.
| Mini Ultra Stick |
Specifications |
| Wing Span |
38.75" |
| Wing Area |
325 sq in |
| Weight |
22-25 oz |
| Fuselage Length |
34" |
| Recommended Motor |
450 Outrunner |
| # Servos Required |
4 or 6 |
|
|
|