As an aircraft ESC, the Phoenix-10 is superbly suited for micro flyers. With several cut-off choices to choose from, this little beauty has cut-off settings for 2, 3, and 4 cell Lithium Ion and Lithium Polymer packs, yet it works just as well with NiCad and NiMH cells. An optional brake, over-current protection, and a host of other features make this THE sensorless to own!

Piccolo and Hornet helicopter owners couldn't believe this little gem when it was introduced. Disabled brake, low cut-off voltage, fixed end points and rotor governor in one unit at an unbeatable price make the Phoenix-10 the choice of micro heli flyers everywhere.

With it's unparalleled feature set, the Phoenix-10 is an excellent ESC for both beginners and expert flyers. It's features allow a single investment to grow with your flying needs

With it's feature-rich user settings, the Phoenix-25 can be set up for almost any installation using 25 amps or less. Three timing settings, over-current protection, helicopter govenor mode, five cut-off voltages and more! It even fits comfortably in narrow sport fuselages.

Castle Creations Phoenix-35 Sensorless Brushless Speed Controller
At 35 amps of power capacity, the Phoenix-35 is suited for medium current installations, but is still extremely small and light. The Phoenix-35 is suited for use with Aveox 2713 and 2726 motors, Astro 020, and 05 motors, Hacker B40 motors, Mega 1615/2210, and Kontronik 480 size brushless motors. The Phoenix-35 gives you the flexibility you've come to expect from Castle Creations controllers. With a total of 7 user-programmable features this speed control has it all! Fly it in 480 to 500-size sport and sailplanes or fixed or collective pitch helis like the Corona, ECO8, or JR Voyager.
User Programmable Features:
• Low-voltage cutoff - 4V, 5V, 6V, 7.2V, 9V, 12V
• Over-current Protection - 5 settings
• Brake Type - 5 settings
• Throttle Range - fixed/self-adjusting/governor
• Timing Advance - 3 choices
• Cutoff Type - hard or soft
• Switching Frequency - 3 choices

Specfications
Cells with BEC	5-10
Cell with out BEC	5-16
Continous	35 amps
Surge	40 amps
Switching Rate	Programmable 11, 22, 41KHZ
Resistance	0.0045 ohms
Brake	Yes
Reversable	Yes, change two wires
Low Voltage Cutoff	Programmable
Size	1.02x1.65x0.16in
Weight	.7oz

 

Castle Creations Phoenix 45 Sensorless Brushless Speed Controller
The Phoenix-45 sensorless control is an excellent choice for higher power airplane or helicopter applications. Use it with Aveox 36xx series motors, Astro 05, Hacker B40 and C40 motors, Mega 2230 and 2245, and Kontronik 500 size brushless motors.

With the same programmable features of it's smaller cousins, the Phoenix-45 can be set for helicopter installations (including those with collective pitch) or airplanes. Additionally, for competition flyers the Phoenix-45 features an adjustable switching rate for optimum efficiency.
User programmable features include:

• Low-voltage cutoff - 4V, 5V, 6V, 7.2V, 9V, 12V
• Over-current Protection - 5 settings
• Brake Type - 5 settings
• Throttle Range - fixed/self-adjusting/governor
• Timing Advance - 3 choices
• Cutoff Type - hard or soft
• Switching Frequency - 3 choices

Castle Creations Phoenix-60 Sensorless Brushless Speed Controller
For higher power airplane or helicopter applications, the Phoenix-60 is an excellent speed control choice. The Phoenix line offers greater flexibility to the modeler by providing an unprecedented variety of programmable features. These options allow it to be used in nearly any application suitable for its current rating. Use it with Aveox 36xx series motors, Astro 05, Hacker B40 and C40 motors, Mega 2230 and 2245, and Kontronik 500 or 600 size brushless motors.

With the now familiar programming options in the Phoenix line, the Phoenix-60 can be set for helicopter installations (including those with collective pitch) or airplanes. Competition flyers will benefit from the Phoenix-60's adjustable switching rate to insure optimum efficiency in their models.

Castle Creations Phoenix-80 Sensorless Brushless Speed Controller
The Phoenix-80 is a high power sensorless control with a whopping 120-amp surge rating! Despite its high current capability the Phoenix-80 is still a compact, lightweight alternative to other controls on the market. At a mere 2.1 ounces (60g) with full length wires, the controller is still packed with features! It comes with the full range of Phoenix programming options including adjustable switching rate, programmable brake and several timing modes for the ultimate in competition controllers.
Specially designed for LMR competition gliders, F5D pylon racers, F5B competition sailplanes, and large helicopters. Use it in any very high-power brushless system, like the Aveox F-series competition motors, Astro 05 pylon motor, low-turn competition Hacker and Kontronik motors, and Mega 2230/2245 (1 or 2 turn) motors.

The Phoenix-80 can be used in either airplane or helicopter installations (including those with collective pitch). Programming is a snap using the on-board LED and your throttle stick - no special equipment is needed

Castle Creations Phoenix-125 Sensorless Brushless Speed Controller
The Phoenix-125 is the ultimate high power sensorless control with a whopping 160-amp surge rating! Despite its high current capability the Phoenix-125 is still a compact, lightweight alternative to other controls on the market. At a mere 3.1 ounces with full length wires, the controller is still packed with features! It comes with the full range of Phoenix programming options including adjustable switching rate, programmable brake and several timing modes for the ultimate in competition controllers.
Specially designed for LMR competition gliders, F5D pylon racers, F5B competition sailplanes, and large helicopters. Use it in any very high-power brushless system, like the Aveox F-series competition motors, Astro 05 pylon motor, low-turn competition Hacker and Kontronik motors, and Mega 2230/2245 (1 or 2 turn) motors.

The Phoenix-125 can be used in either airplane or helicopter installations (including those with collective pitch). Programming is a snap using the on-board LED and your throttle stick - no special equipment is needed